产品咨询:18560212198
客户服务:0531-87982198 
banner1
banner3
banner4
banner5
新闻公告 行业信息 政策解读
当前位置: 首页 >资讯中心 > 行业信息

流水线输送带出现横断方法!

一、遇到连续横向现象,应先停机检查,仔细检查后,才能清楚地发现这种现象的原因。
1、 In case of continuous transverse phenomenon, stop the machine for inspection first, and then check carefully, so as to clearly find the cause of this phenomenon.
二、输送机可能有各自突出的滚筒槽角,这可能导致皮带线断裂,从而产生横截面结果。
2、 Conveyors may have their own protruding drum groove angles, which may cause the belt line to break, resulting in cross-sectional results.
三、主动电动滚筒、张力电动滚筒和从动电动滚筒上覆盖了一些不正常的粘合剂,使得传送带上布满了各种大小的凸起,很容易穿过输送带的整个区域。为了避免这种现象,通常需要定期清洗输送带的异物。
3、 The driving electric drum, tension electric drum and driven electric drum are covered with some abnormal adhesive, so that the conveyor belt is covered with protrusions of various sizes, which can easily pass through the whole area of the conveyor belt. In order to avoid this phenomenon, it is usually necessary to clean the foreign matters on the conveyor belt regularly.
山东流水线输送带
输送带长期使用后会出现各种问题。为了避免出现问题,应提前进行预防。那么,如何防止输送带损坏呢
Various problems will occur after long-term use of conveyor belt. In order to avoid problems, prevention should be carried out in advance. So, how to prevent the conveyor belt from being damaged
选择资质完善、体系完善、信誉良好的输送带厂家供货,流水线输送带本身质量带来的潜在风险。
Select conveyor belt manufacturers with perfect qualification, perfect system and good reputation to eliminate the potential risks caused by the quality of assembly line conveyor belt.
胶带受料及转载点漏斗的设计应合理。既避免了形成较大的落差,又改变了货物的流向,使物品流向和皮带机的运输一致。
The design of the hopper at the belt receiving and transfer point shall be reasonable. It not only avoids the formation of large drop, but also changes the flow direction of goods, so that the flow direction of goods is consistent with the transportation of belt conveyor.
禁止用输送带运输大型物品和铁质物品。对于粒径符合要求的材料,还应保证温度,以免造成皮带表面覆盖胶的损坏、剥离和脱落。
It is forbidden to transport large articles and iron articles with conveyor belts. For the materials with particle size meeting the requirements, the temperature shall also be guaranteed to avoid damage, peeling and falling off of the covering glue on the belt surface.
从运输系统源头控制铁器及坚硬长条片矸的进入,并沿运输系统设置必要的破碎机和除铁机。
Control the entry of ironware and hard long strip gangue from the source of the transportation system, and set necessary crushers and iron removers along the transportation system.
输送带的存放应避免日晒雨淋。对于长期存放的输送带,必须进行纵向拉伸强度试验。
The conveyor belt shall be stored away from the sun and rain. For the conveyor belt stored for a long time, the longitudinal tensile strength test must be carried out.
对于输送带导槽、清扫器等附件,应认真进行日常维护,间隙增大或损坏应及时修理或更换。
For the conveyor belt guide groove, sweeper and other accessories, daily maintenance shall be carried out carefully, and the gap increase or damage shall be repaired or replaced in time.
滚筒应定期检查,尽早发现运行中的裂纹、局部过度磨损等隐患。
The drum shall be inspected regularly to find hidden dangers such as cracks and local excessive wear during operation as soon as possible.